What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 27.06.2025 02:47
This is where this question deviates from being a 'generic' question, and becomes more specific.
but I think this circuit , shows a few more pieces.
what exactly is a ‘surge’ protector?
What is your review of working in EY?
2024–10–14 [Omar Gharbi Omar Gharbi ]
The third is lightning and “how it gets conducted into a home.”
One is “what exactly is in a ‘surge protector’ ? ”
What’s a historical event you wish more people talked about?
There are two important concepts here.
In schematic diagrams this is the symbol for a fuse:
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
What is lightning?
So, the voltage could go up to 500 volts, and the fuse will not open up.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
eight
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
Would you respect the US with a woman as president?
This is the picture of an electronic coil of wire wound around a core of magnetic material.
The other is “what does a “fuse” do?”
Now when you have a certain ac resistance, then a current flows in a loop.
Wall Street’s big rally stalls following some discouraging economic data - AP News
But it can get overloaded, and no longer works.
Because the load is inductive, the current lags the voltage.(by a bit).
He then describes Rainy Season and Lightning.
Don't miss the half-lit first quarter moon rise tonight — Here's what to look for - Space
He then asserts :
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
so, what happens?
In what ways Indian parents are destroying their children's life?
nine
2024–10–16 [ OO OLAOYE OYEBODE ]
Here is a simplified AC power diagram.
Carbon capture method mines cement ingredients from the air - Tech Xplore
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
2024–10–10[John johnson John Johnson ]
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Scientists Reveal Easy Three-Step Plan to Terraform Mars - futurism.com
He then describes the function of a fuse.
This is 'the assistant's answer'
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
8 best walking exercises that will help us lose 3-4 kgs within a month - Times of India
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
[image of Common-mode choke]
First Sentence:
Barnstars:
A fuse is a non-resetable over current circuit protector.
[old diagram got deleted by accident]
It seems Mohan does not understand the difference between a comment and an Answer.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
For this case there are devices called Metal oxide varistors (MOV).
Can the fuse protect the electronic devices from lightning instead of a surge protector.
Edit 2024–10.
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
(Dc diagram shown, AC is similar).
What does a fuse do?
It also is a device that limits the change in current flow.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
But… the neutral is now “floating” because of the 1 ohm resistance.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
A circuit breaker is similar, but is resettable.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
These are simplified answers to the original question, and does not change anything I wrote above.
a photo is worth a thousand words.
This device then solves the entire problem.
I post the exact comment here.
This is where the MOV conducts again, and dissipated the energy.
Upvotes:
There are three different concepts here that are getting confused.
but this device (an Inductor) … impedes the rapid changes in the current.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
At least they know the answer if they wanted it.
The MOV will conduct when the voltage exceeds 50% of line voltage.
An AC voltage/ current source, and an ac inductive load.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
The bolt then partially travels down the line to your home.
These devices are installed between the “hot” and “neutral” and protective ground.
One
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
This one hit behind the barn.
the problem then depends on "how fast does the fuse operate?".